Ice Machines: Which One is Right for Your Business?
If you are evaluating ice machines to purchase a new one for your business, you know that are many options available. So what kind of ice machine’s right for you? The answer depends on several factors, so a little forethought in the beginning when considering ice machines can save you money and a major headache in the long run.
Your Ice Machine’s Dimensions
Perhaps the easiest thing you can ask yourself about your ice machine’s requirements is what its dimensions should be. After all, you don’t want to buy a machine, only to find that you can’t fit it through the door! Measure the doorways and the space you want to put the ice machine to make sure you will have plenty of room. Allow for five to eight inches of space on every side of the ice machine. If you are going to purchase a compressor, be sure to consider the space it will fit into also.
Volume of Ice
Calculate the volume of ice you will need to remain operational. Keep in mind the fluctuations in the amount you will use from season to season, as well as the climate in which your business operates, especially during peak hours. You should also take into account the potential of growth for your business, so we recommend adding 10-20% to your estimate. When you evaluate ice machines, keep this number in mind, as ice machines come in a variety of options when it comes to pounds of ice produced per 24 hours.
Types of Ice
Next consider the types of ice you’ll need. You may only need a few kinds, or your need may vary with the seasons. (For example, nugget ice may be more popular during the summer than the winter.) Because of this factor, you may need to consider multiple ice machines.
Make sure you have the proper electrical and plumbing connections available where you want to place your ice machine. Ice machines need a direct connection to a supply of cold water, as well as a separate drain line for both the ice machine and its bin. Additionally, electrical and water connections need to be at least within six feet of the machine.